|1.||Remove medial/lateral stays and open all straps.|
|2.||Identify longer portion of brace and place forearm into unit, making sure elbow is seated firmly onto elbow pad. NOTE: elbow pad is removable if desired.|
|3.||Grasp sides of shorter portion of brace and wrap around bicep area. Use small hook tab to assist in closure. NOTE: excess material may be trimmed at this time.|
|4.||Grasp side of longer portion of brace and wrap around forearm area. Use small hook tab to assist in closures. NOTE: excess material may be trimmed at this time.|
|5.||Place lateral 90 DEG stay assembly on brace, making sure stay falls at midline of arm.|
|6.||Place medial 90 DEG stay assembly on brace, making sure stay falls at midline of arm.|
|7.||Beginning with most distal strap, wrap contact closure around arm and secure. Then continue distal to proximal to secure all four straps.|
|8.||Adjust straps to desired tension level, using caution not to over tighten.|
669 East Industrial Park Drive - Manchester, NH 03109
Phone (603) 623-3344 - Fax (603) 623-4111 - www.corflex.com
© Corflex | The advice and information contained in this document is not intended as a substitute for medical counseling.
If you have any questions about treatment for a specific condition, please check with a health care professional.